Our electric, modular Conveyor is a compact solution that enables efficient transfer of materials. The conveyors come in 9m or 13m lengths.
The electric conveyor is ideal for moving materials such as bricks, concrete and mortar. Materials can be conveyed up or down the slope.
The conveyor comes with a removable drive system for easy and safe set-up. The electric motor and gearbox assembly can easily be removed and re-fitted on site. A quick coupler power supply socket is used to connect the power cable.
The Gearbox position is retained by a flanged bolt securing it in its position. The torque arm on the gearbox is secured into position with a safety pin as well as a nut. The pin is also welded to the frame with a chain, preventing accidental loss.
The rear feed chute was specifically designed to be as low to the ground as possible. This enables easy wheelbarrowing tipping into the chute and easy shovelling onto the conveyor
The rubber guards surrounding the chute protect the return idler from rocks and material.
Lifting lugs on the conveyor frame make moving and installing the conveyor on site easy and safe, preventing damage to the conveyor.
Ribbed return idlers cause the returning belt to vibrate and remove any dirt sticking to conveyor belt.
Both ends of the conveyor are fitted with safety covers to comply with safety standards.
Troughing idlers are made of heavy duty tubing and end caps with bearings installed. They are slot mounted and therefore easy to replace.
The conveyor swivels on the base frame keeping it stable whilst lowering the feed chute position when the conveyor is inclined.
The hook at the bottom of the conveyor helps to keep the conveyor in position where it latches onto the building.